This page is part of archived documentation for openHAB 3.2. Go to the current stable version

# Installation of Add-ons

Add-ons can be installed in different ways, described below.

# Through UI

Log into your admin account (if not already done). Navigate to Settings and have a look for the add-ons section. Search for the desired add-on in the categories and press install.

installing Add-ons through UI

# Through Configuration Files

For this installation option you need to know the id of the desired add-on, e.g., network or mqtt.

You can find it out with the following command within openHAB console:

feature:list | grep ^openhab

A list of all available add-ons starting with "openhab" will be returned. It could look similar to this example:

...
openhab-binding-mqtt                      | 3.0.0.M5         |          | Started     | openhab-addons-3.0.0.M5 | MQTT Binding
openhab-binding-netatmo                   | 3.0.0.M5         |          | Started     | openhab-addons-3.0.0.M5 | Netatmo Binding
openhab-binding-onewire                   | 3.0.0.M5         |          | Uninstalled | openhab-addons-3.0.0.M5 | OneWire Binding
...
openhab-binding-network                   | 3.0.0.M5         |          | Uninstalled | openhab-addons-3.0.0.M5 | Network Binding
...

According to the naming convention for bundles the id for the shown example is network.

Another way to find the correct id is to look at the URL of the add-on documentation page. For example the url for the Network Binding documentation is

https://www.openhab.org/addons/bindings/network/

In this case, the id would be "network".

With this information we can now edit the addons.cfg file in the $OPENHAB_CONF/services folder on the machine you are running openHAB on. The path depends on your installation. You can find out the correct locations on the corresponding documentation pages, e.g. Linux or Windows.

The file could look like this (depending on your chosen package and already installed add-ons):

ui = basic,habpanel
action = pushover
binding = astro
transformation = jsonpath
persistence = influxdb

To install the network Binding like we want in this example, we just need to add the id network to the Binding section.

binding = astro,network

After saving the file, the add-on will be installed.

# Through manually provided add-ons

Attention

This option is adressed to advanced users. Installing add-on's with a .jarfile can lead to problems, because add-on dependencies may not be installed. Please make sure to use this option only in special cases (like add-on testing for an upcoming version) or when you know what you are doing.

For this installation option you need a bundles .jar file. One way of retrieving those files is mentioned above in the openHAB console part.

Place the .jar file in the addons folder on the machine you are running openHAB on. As described already for the addons.cfg option, the path depends on your installation. Place the .jar file in the folder Additional add-on files as described in File Locations (Linux, Windows or macOS).