Broadlink Thermostat Binding

The binding integrates devices based on Broadlinkthermostat controllers. As the binding uses the broadlink-java-api (opens new window), theoretically all devices supported by the api can be integrated with this binding.

Supported Things

Note: So far only the Floureon Thermostat has been tested! The other things are "best guess" implementations.

Things	Description	Thing Type
Floureon Thermostat	Broadlinkthermostat based Thermostat sold with the branding Floureon	floureonthermostat
Hysen Thermostat	Broadlinkthermostat based Thermostat sold with the branding Hysen	hysenthermostat

Discovery

Broadlinkthermostat devices are discovered on the network by sending a specific broadcast message. Authentication is automatically sent after creating the thing.

Thing Configuration

Two parameter are required for creating things:

• host: The hostname or IP address of the device.
• mac : The network MAC of the device.

The autodiscovery process finds both parts automatically.

Channels

Floureon-/Hysenthermostat

Channel Type ID	Item Type	Description
power	Switch	Switch display on/off and enable/disables heating
mode	String	Current mode of the thermostat (auto or manual)
sensor	String	The sensor (internal/external) used for triggering the thermostat
roomtemperature	Number:Temperature	Room temperature, measured directly at the device
roomtemperatureexternalsensor	Number:Temperature	Room temperature, measured by an external sensor
active	Switch	Show if thermostat is currently actively heating
setpoint	Number:Temperature	Temperature setpoint that open/close valve
temperatureoffset	Number:Temperature	Manual temperature adjustment
remotelock	Switch	Locks the device to only allow remote actions
time	DateTime	The time and day of week of the device

Full Example

demo.things:

Thing broadlinkthermostat:floureonthermostat:bathroomthermostat "Bathroom Thermostat" [ host="192.168.0.23", mac="00:10:FA:6E:38:4A"]

demo.items:

Number:Temperature  Bathroom_Thermostat_Temperature      "Room temperature [%.1f %unit%]"        <temperature>  { channel="broadlinkthermostat:floureonthermostat:bathroomthermostat:roomtemperature"}
Number:Temperature  Bathroom_Thermostat_Temperature_Ext  "Room temperature (ext) [%.1f %unit%]"  <temperature>  { channel="broadlinkthermostat:floureonthermostat:bathroomthermostat:roomtemperature"}
Number:Temperature  Bathroom_Thermostat_Setpoint         "Setpoint [%.1f %unit%]"                <temperature>  { channel="broadlinkthermostat:floureonthermostat:bathroomthermostat:setpoint"}
Switch              Bathroom_Thermostat_Power            "Power"                                                { channel="broadlinkthermostat:floureonthermostat:bathroomthermostat:power"}
Switch              Bathroom_Thermostat_Active           "Active"                                               { channel="broadlinkthermostat:floureonthermostat:bathroomthermostat:active"}
String              Bathroom_Thermostat_Mode             "Mode"                                                 { channel="broadlinkthermostat:floureonthermostat:bathroomthermostat:mode"}
String              Bathroom_Thermostat_Sensor           "Sensor"                                               { channel="broadlinkthermostat:floureonthermostat:bathroomthermostat:sensor"}
Switch              Bathroom_Thermostat_Lock             "Lock"                                  <lock>         { channel="broadlinkthermostat:floureonthermostat:bathroomthermostat:remotelock"}
DateTime            Bathroom_Thermostat_Time             "Time [%1$tm/%1$td %1$tH:%1$tM]"        <time>         { channel="broadlinkthermostat:floureonthermostat:bathroomthermostat:time"}

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)