This page is part of archived documentation for openHAB 3.2. Go to the current stable version

# Siemens RDS Binding

The Siemens RDS binding provides the infrastructure for connecting openHAB to the Siemens Climatix IC cloud server and integrate connected Siemens RDS Smart thermostats (opens new window) onto the openHAB bus.

Siemens RDS

# Supported Things

The binding supports two types of Thing as follows..

Thing Type Description
Climatix IC Account User account on the Siemens Climatix IC cloud server (bridge) to connect with respective Smart Thermostat Things below..
RDS Smart Thermostat Siemens RDS model Smart Thermostat devices

# Discovery

You have to manually create a single (Bridge) Thing for the Climatix IC Account, and enter the required Configuration Parameters (see Thing Configuration for Climatix IC Account below). If the Configuration Parameters are all valid, then the Climatix IC Account Thing will automatically attempt to connect and sign on to the Siemens Climatix IC cloud server. If the sign on succeeds, the Thing will indicate its status as Online, otherwise it will show an error status.

Once the Thing of the type Climatix IC Account has been created and successfully signed on to the cloud server, it will automatically interrogate the server to discover all the respective RDS Smart Thermostat Things associated with that account. After a short while, all discovered RDS Smart Thermostat Things will be displayed in the Inbox. If in future you add new RDS Smart Thermostat devices to your Siemens account (e.g. via the Siemens App) then these new devices will also appear in the Inbox.

# Thing Configuration for "Climatix IC Account"

The Climatix IC Account connects to the Siemens Climatix IC cloud server (bridge) to communicate with any respective RDS Smart Thermostats associated with that account. It signs on to the cloud server using the supplied user's credentials, and it polls the server at regular intervals to read and write the data for each Smart Thermostat that is configured in that account. Before it can connect to the server, the following Configuration Parameters must be entered.

Configuration Parameter Description
userEmail The e-mail address of the user account on the cloud server; as entered in the Siemens App when first registering a thermostat.
userPassword The password of the user account on the cloud server; as entered in the Siemens App.
pollingInterval Time interval in seconds between polling requests to the cloud server; the value must be between 8..60 seconds; the Default value (recommended) is 60 seconds.
apiKey The key code needed to access the application program interface on the Siemens Climatix IC cloud server; you can request a key code from Siemens on their web-site.

Note: You must create ONLY ONE Thing of the type Climatix IC Account; duplicate Climatix IC Account Things risk causing communication errors with the cloud server.

# Thing Configuration for "RDS Smart Thermostat"

Each RDS Smart Thermostat Thing is identified in the Climatix IC Account by means of a unique Plant Id code. The automatic discovery determines the Plant Id codes of all connected thermostats automatically.

Configuration Parameter Description
plantId The unique code to identify a specific RDS Smart Thermostat Thing on the Siemens Climatix IC cloud server.

# Channels for RDS Smart Thermostat

The RDS Smart Thermostat supports several channels as shown below.

Channel Data Type Description
roomTemperature Number:Temperature Actual Room Temperature
targetTemperature Number:Temperature Target temperature setting for the room
thermostatOutputState String The output state of the thermostat (Heating, Off, Cooling)
roomHumidity Number:Dimensionless Actual Room Humidity
roomAirQuality String Actual Room Air Quality (Poor..Good)
outsideTemperature Number:Temperature Actual Outside temperature
energySavingsLevel String Energy saving level (Green Leaf score) (Poor..Excellent)
occupancyModePresent Switch The Thermostat is in the Present Occupancy Mode (Off=Absent, On=Present)
thermostatAutoMode Switch The Thermostat is in Automatic Mode (Off=Manual, On=Automatic)
hotWaterAutoMode Switch The Domestic Water Heating is in Automatic Mode (Off=Manual, On=Automatic)
hotWaterOutputState Switch The On/Off state of the domestic water heating

# Full Example

# demo.things File

Bridge siemensrds:climatixic:mybridgename "Climatix IC Account" [ userEmail="[email protected]", userPassword="secret", apiKey="32-character-code-provided-by-siemens", pollingInterval=60 ]
}

To manually configure an RDS Smart Thermostat Thing requires knowledge of the "Plant Id" which is a unique code used to identify a specific thermostat device in the Siemens Climatix IC cloud server account.

Bridge siemensrds:climatixic:mybridgename "Climatix IC Account" [ userEmail="[email protected]", userPassword="secret", apiKey="32-character-code-provided-by-siemens", pollingInterval=60 ] {
    Thing rds mydownstairs "Downstairs Thermostat" @ "Hall" [ plantId="Pd0123456-789a-bcde-0123456789abcdef0" ]
    Thing rds myupstairs "Upstairs Thermostat" @ "Landing" [ plantId="Pd0123456-789a-bcde-f0123456789abcdef" ]
}

# demo.items File

Number:Temperature Upstairs_RoomTemperature "Room Temperature" { channel="siemensrds:rds:mybridgename:myupstairs:roomTemperature" }
Number:Temperature Upstairs_TargetTemperature "Target Temperature" { channel="siemensrds:rds:mybridgename:myupstairs:targetTemperature" }
String Upstairs_ThermostatOutputState "Thermostat Output State" { channel="siemensrds:rds:mybridgename:myupstairs:thermostatOutputState" }
Number:Dimensionless Upstairs_RoomHumidity "Room Humidity"	{ channel="siemensrds:rds:mybridgename:myupstairs:roomHumidity" }
String Upstairs_RoomAirQuality "Room Air Quality" { channel="siemensrds:rds:mybridgename:myupstairs:roomAirQuality" }
Number:Temperature Upstairs_OutsideTemperature "Outside Temperature" { channel="siemensrds:rds:mybridgename:myupstairs:outsideTemperature" }
String Upstairs_EnergySavingsLevel "Energy Savings Level" { channel="siemensrds:rds:mybridgename:myupstairs:energySavingsLevel" }
Switch Upstairs_OccupancModePresent "Occupancy Mode Present" { channel="siemensrds:rds:mybridgename:myupstairs:occupancyModePresent" }
Switch Upstairs_ThermostatAutoMode "Thermostat Auto Mode" { channel="siemensrds:rds:mybridgename:myupstairs:thermostatAutoMode" }
Switch Upstairs_HotWaterAutoMode "Hotwater Auto Mode" { channel="siemensrds:rds:mybridgename:myupstairs:hotWaterAutoMode" }
Switch Upstairs_HotWaterOutputState "Hotwater Output State" { channel="siemensrds:rds:mybridgename:myupstairs:hotWaterOutputState" }

# demo.sitemap File

sitemap siemensrds label="Siemens RDS"
{
Frame label="Heating" {
    Text     item=Upstairs_RoomTemperature
    Setpoint item=Upstairs_TargetTemperature minValue=5 maxValue=30 step=0.5
    Switch   item=Upstairs_ThermostatAutoMode
    Switch   item=Upstairs_OccupancyModePresent
    Text     item=Upstairs_ThermostatOutputState
  }

Frame label="Environment" {
    Text item=Upstairs_RoomHumidity
    Text item=Upstairs_OutsideTemperature
    Text item=Upstairs_RoomAirQuality
    Text item=Upstairs_EnergySavingsLevel
  }

Frame label="Hot Water" {
    Switch item=Upstairs_HotwaterAutoMode
    Switch item=Upstairs_HotwaterOutputState
  }
}