IpObserver Binding

This binding is for any weather station that sends data to an IP Observer module. The weather stations that do this are made by a company in China called Fine Offset and then re-branded by many distribution companies around the world. Some of the brands include Aercus (433mhz), Ambient Weather (915mhz), Frogitt, Misol (433mhz), Pantech (433mhz), Sainlogic and many more. Whilst Ambient Weather has it own cloud based binding, the other brands will not work with that binding and Ambient Weather do not sell outside of the United States. This binding works fully offline and uses local scraping of the weather station data at 12 second resolution if you wish and is easy to setup. The other binding worth mentioning is the weather underground binding that allows the data to be intercepted on its way to WU, however many of the weather stations do not allow the redirection of the WU data and require you to know how to do redirections with a custom DNS server on your network. This binding is by far the easiest method and works for all the brands and will not stop the data still being sent to WU if you wish to do both at the same time. If your weather station came with a LCD screen instead of the IP Observer, you can add on the unit and the LCD screen will still work in parallel as the RF data is sent 1 way from the outdoor unit to the inside screens and IP Observer units.

Supported Things

There is only one thing that can be added and is called weatherstation.

Discovery

Auto discovery is supported and may take a while to complete as it scans all IP addresses on your network one by one.

Thing Configuration

Parameter	Required	Description
address	Y	Hostname or IP for the IP Observer
pollTime	Y	Time in seconds between each Scan of the livedata.htm from the IP Observer
autoReboot	Y	Time in milliseconds to wait for a reply before rebooting the IP Observer. A value of 0 disables this feature allowing you to manually trigger or use a rule to handle the reboots.

Channels

channel	type	description
temperatureIndoor	Number:Temperature	The temperature indoors.
temperatureOutdoor	Number:Temperature	The temperature outdoors.
humidityIndoor	Number:Dimensionless	The humidity indoors.
humidityOutdoor	Number:Dimensionless	The humidity outdoors.
pressureAbsolute	Number:Pressure	The atmospheric pressure directly measured by the sensor.
pressureRelative	Number:Pressure	The pressure adjusted to sea level to allow easier comparisons between different locations.
windDirection	Number:Angle	The angle in degrees that the wind is coming from.
windAverageSpeed	Number:Speed	The average wind speed.
windSpeed	Number:Speed	The exact wind speed. Not all stations send this data.
windGust	Number:Speed	The recent wind gust speed.
windMaxGust	Number:Speed	The recent max wind gust speed.
solarRadiation	Number:Intensity	Solar radiation.
uv	Number	UV measurement.
uvIndex	Number	The UV index.
rainHourlyRate	Number:Length	The amount of rain that will fall, if it continues to fall at the same rate for an hour. Measures how heavy the current rain is falling.
rainToday	Number:Length	Amount of rain since 12:00am.
rainForWeek	Number:Length	Amount of rain for the week.
rainForMonth	Number:Length	Amount of rain for the month.
rainForYear	Number:Length	Amount of rain for the year.
batteryIndoor	Switch	Battery status, ON if battery is low.
batteryOutdoor	Switch	Battery status, OFF if battery is normal.
responseTime	Number:Time	How long it took the weather station to reply to a request for the live data.
lastUpdatedTime	DateTime	The time scraped from the weather station when it last read the sensors.

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)